Metra Electronics Instruction Metra Line Output Converter Wiring Diagram

If you are looking to upgrade your car audio system, a Metra Electronics Line Output Converter (LOC) is a great way to do it. A Line Output Converter is a device that converts speaker level output from a factory stereo or aftermarket head unit into a line level signal that can be connected to an amplifier or other audio device. In order to wire up the LOC, you will need to know the color codes of the wires and where they should be connected. In this article, we will talk about how to wire a Metra Electronics Line Output Converter and what type of connections you need for your system.

What Are The Color Codes For The Wires On A Metra Line Output Converter?

When wiring a Metra Electronics Line Output Converter, you will need to know the color codes for the wires to ensure that everything is connected correctly. The color of the wires on the LOC may vary depending on the model, but typically the wires are as follows:

White – This wire is usually used for ground.
Black – This wire is usually used for the main power input.
Red – This wire is usually used for the remote turn on.
Blue – This wire is usually used for the input connection.
Green – This wire is usually used for the output connection.

Where Should The Ground Wire Of The Line Output Converter Be Connected?

The ground wire of the Line Output Converter should be connected to a clean metal surface in the vehicle such as a screw or metal mounting bracket. Make sure that the connection is made tightly and that there is no corrosion or rust on the metal surface.

What Are The Input And Output Connections On A Metra Line Output Converter?

The input and output connections on a Metra Electronics Line Output Converter are fairly simple. The input connection is where the speaker level signal from the factory radio or aftermarket head unit is connected. The output connection is where the line level signal is sent to the amplifier or other audio device. This connection is sometimes referred to as pre-amp or pre-amp out.

Can A Line Output Converter Be Used To Connect An Amplifier To A Factory Stereo System?

Yes, a Line Output Converter can be used to connect an amplifier to a factory stereo system. This is especially useful if the factory stereo system does not have an RCA input or if the amplifier requires a higher voltage signal than what the factory stereo can provide. When using a Line Output Converter, make sure to match the impedance of the amplifier and the LOC for best results.

Do Line Output Converters Require A Power Source?

Yes, Line Output Converters do require a power source in order to work properly. Typically, they are powered by the vehicle's battery or a separate power supply. They usually come with a set of power wires that must be connected in order for the LOC to function.

What Is The Purpose Of A Line Output Converter?

The purpose of a Line Output Converter is to convert a speaker level output signal from a factory stereo or aftermarket head unit into a line level signal that can be connected to an amplifier or other audio device. This allows you to get the most out of your audio equipment by allowing you to connect it to any factory stereo or aftermarket head unit.

Are Line Output Converters Adjustable?

Yes, some Line Output Converters are adjustable. Depending on the model, they may allow you to adjust the output level of the LOC, the frequency response, and/or the gain. Adjusting these settings can help optimize your sound system and get the most out of your audio equipment.

What Is The Difference Between A Line Output Converter And A Hi-Lo Converter?

A Line Output Converter is a device that converts a speaker level output signal into a line level signal. A Hi-Lo Converter is a device that converts a low-level signal into a high-level signal. For example, a Hi-Lo Converter would be used to convert the low-level signal from a CD player into a high-level signal that can be connected to an amplifier.

In conclusion, Metra Electronics Line Output Converters are great for upgrading your car audio system. Wiring up the LOC is fairly easy, just make sure to match the color codes of the wires and connect the ground wire to a clean metal surface. Also, make sure to connect the input and output connections correctly. Lastly, you can adjust the settings on some models to optimize your sound system. By following these tips, you can get the most out of your audio equipment and have great sound quality in your car.